cairui2003

  • Preparation of chamber filter press before operation

    427

    Preparation of chamber filter press before operation Before operating this sludge filter press, please check the safety around the sludge dewatering filter press as well as the related ancillary equipment as follows: (1) Check whether the sludge filter press and its components are in good condition. (2) Remove all debris from the filter press, filter plate and filter cloth. (3) Check the oil...

    View full text
  • What are the failures of plate and frame filter presses

    480

    What failures can occur in plate and frame filter presses Plate and frame filter press is the equipment for sludge treatment in the sewage treatment system, and its function is to press and filter the sludge after sewage treatment to form a large filter cake (mud cake) for exclusion. Plate and frame filter press consists of filter press plate, hydraulic system, filter press frame, filter plate transmission...

    View full text
  • Filter press applications for the leather industry

    424

    The composition of tannery wastewater is complex and seriously polluted, and it is reasonable to adopt the integrated treatment technology of segregation and combination of various methods for the composition and characteristics of tannery wastewater, the technological development of wastewater treatment and the research results. The integrated wastewater treatment technology, as well as domestic and foreign treatment of tannery wastewater, some new types of...

    View full text
  • How to choose a plate and frame filter press

    683

    Factors affecting the selection of filter presses Temperature and viscosity, physical and chemical properties of the material in the state of filtration, processing capacity per unit of time, moisture content of the cake, the solids content in the filtrate, the degree of washing of the cake, etc.; the selection of the size of the model (filtration area and chamber volume) is mainly based on the use of analogical methods and laboratory tests to determine the size of the filter press.

    View full text
  • Difference between chamber filter press and plate and frame filter press

    485

     Plate and frame type filter press Plate and frame type filter chamber has a flat plate and a hollow filter frame composed of two parts, the filter cloth is fixed in the plate frame, is the main form of the early filter press, the main advantage of this model is to replace the filter cloth is very convenient. But there are also shortcomings, low efficiency, poor filtration, the filter plate is easy to damage; chamber type...

    View full text
  • What kind of filter press is called plate and frame filter press?

    432

    The plate and frame filter press consists of alternately arranged filter plates and filter frames to form a group of filter chambers. There are grooves on the surface of the filter plate, and its protruding parts are used to support the filter cloth. There are holes on the corners of the filter frame and the filter plate, which form a complete channel after assembly and can pass into the suspension, washing water and lead out the filtrate. The plate and frame have handles on each side to support the beam...

    View full text
  • How to accept the quality of plate and frame filter press

    494

    Plate and frame filter press should refer to the following standards I. Requirements for the solid rate of the sludge cake: the highest solid rate of the sludge cake, the general plate and frame filter press compared with other types of dewatering machines. Up to sixty-five percent, if the sludge from the reduction of the sludge pile occupies an area of consideration, plate and frame filter press should be the preferred option. To reduce the operator...

    View full text
  • Troubleshooting charts that filter press operators must understand

    554

    Filter Press Troubleshooting Table Filter Press Manufacturers serial number Failure phenomenon Causes Troubleshooting 1 Filter plate section Running material between 1.Insufficient oil pressure 2.Debris on the sealing surface of the filter plate 3. Uneven or folded filter cloths 4. High feed pump pressure 5. Feed pump pressure flow...

    View full text
  • How Filter Presses Filter

    466

    Filter press filtration First, the filtration of different materials and the same material due to the water content, and even different temperatures, the effect of filtration (speed, water content) may be different, and some materials in the filtration and even add filter aids such as Cao, calcium carbide slag, flocculants, etc., has been adjusted to the filtration characteristics of the material. So its filter cake and...

    View full text
  • 11 points to remember when using a filter press

    460

    What to pay attention to when using the filter press 1, must be in accordance with the order of the filter press manufacturer and the specified number of filter plates placed, prohibited in less than the specified number of filter plates in the case of boot operation, in order to prevent accidents. 2, the pressure of the oil cylinder shall not exceed the rated value, otherwise it will damage the relevant parts of the filter press. 3、Filtrate, washing liquid...

    View full text
Expand More
Welcome to visit our factory!

loading...

en_GBEN