How to fit the first filter cloth of a filter press

How to fit the first filter cloth of a filter pressHow to install:

The filter cloth of filter press mainly includes: polyester filter cloth, polypropylene filter cloth, nylon filter cloth, polyvinyl chloride filter cloth and other kinds of filter cloth. Here we will introduce how to correctly install the filter cloth on the filter plate of the filter press.

1. Tighten the filter cloth clamps.

2. Hang the filter cloth on the filter plate and keep the surface of the cloth flat.

3,Filter Press ClothThe cloth grippers pass through the inlet holes of the filter press plate from both sides.

4.Tighten the cloth clamp;

5. Check whether the feed holes on the filter cloth are aligned with those on the filter plate.

6. Roll one of the filter cloths into a thin (tube) shape and then wear the inlet in the middle of the filter plate.

7, the two sides of the filter cloth will be arranged flat, and make the tie at the top of the filter plate, the front and rear pieces of the filter cloth tied with the tie will cover the filter plate flatly.

How to fit the first filter cloth of a filter pressCaveats:

1, the filter cloth around the filter plate pressing contact part should ensure flat, can not produce wrinkles, to avoid being squeezed by the filter plate filter cloth caused by damage or mud leakage.

2, to avoid the grommet tail is too long may reach into the part of the filter plate press fit and damage the filter cloth, or cause mud leakage, should cut off the short tail.

3, installation, need to pay attention to the filter cloth and filter plate between no foreign objects or larger sludge particles, larger sludge particles or foreign objects may be in the plywood, causing damage to the filter plate or filter cloth.

4, the installation of filter cloth should pay attention to the front and back (to the mud surface and non-mud surface), generally no special requirements, the cloth of the filter cloth (polished surface) to the mud. Otherwise, the wrong installation will result in easy blockage of the filter cloth and low filtration efficiency.

5、Don't lock the filter cloth too tightly with the grommet, otherwise the residual sludge in the filter cloth in the contact part of the filter plate pressing will not be removed by automatic cleaning.

6, spare filter cloth should be stored in a cool and dry place, it is recommended to use a dark shade cloth to be protected, to avoid ultraviolet radiation, to prevent the aging of the filter cloth material.

7, before installing the filter cloth, it is necessary to install the supporting filter cloth, whose function is to minimise the abrasiveness of the cloth being rapidly detached from the filter cake downward due to gravity and possibly rubbing the bumps on the surface of the filter plate when discharging sludge, in order to protect the filter filter cloth, prolong the service life of the filter cloth and enhance the filtration effect.

8, filter press filter cloth after cleaning, to hang to dry, temporarily not used filter cloth should also be placed in a cool, dry place, there are dark shade cloth to protect up, not be able to be the sun has been direct sunlight, otherwise the filter press filter cloth is easy to aging.

---